SIMATIC TOP CONNECT

SIMATIC TOP CONNECT

SIEMENS Catalog
reset a SIMATIC S7-300 CPU and MMC
Weighing module SIWAREX WP251
SIMATIC HMI Comfort Panels
Stabilisasi dan Efesiensi Sistem Pengabelan dengan SIMATIC TOP CONNECT
SIMATIC TOP CONNECT
SIMATIC TOP CONNECT

Dengan menggunakan SIMATIC TOP CONNECT , SIEMENS menawarkan pengoneksian lengkap untuk beberapa produknya seperti, SIMATIC S7-300, S7-1500, SIMATIC ET 200M, ET 200MP, ET 200SP, dan LOGO. Tersedia beberapa versi SIMATIC TOP CONNECT, antara lain seperti Full Model Konektivitas berdasarkan alat yang ingin di sambungkan dan juga konektivitas yang flexible yang di gabungkan di satu pusat atau di hubungkan dengan segala jenis kabel. Untuk hasil yang di tawarkan sama, ketika koneksi sudah di sambungkan, berfungsi dengan baik dan siap untuk di gunakan.

BEBERAPA VERSI SIMATIC TOP CONNECT
SIMATIC TOP CONNECT FOR S7-1500 DAN ET 200MP

Menawarkan 2 sistem pengabelan untuk efisiensi input dan output modul SIMATIC S7-1500 dan ET 200MP

KEUNGGULAN

Fully Modular Connection
  • Guarented sistem conformity with SIMATIC S7-1500 and ET 200MP
  • Reduced cabling work
  • Fast connection of sensors and actuators in the field
  • Modular system with minimum intallation cost
  • No mixing-up of singel wires
  • Reduced commissioning, testing and service times
  • Terminal modules replace terminal blocks and offer signaling of digital IOs by mean of LED and voltage adjusment, for example, from 230V AC to 24 VDC
FLEXIBLE CONNECTION
  • Guaranteed system confornity with SIMATIC S7-1500 and ET 200MP
  • Easy connection of sensors and actuators in the control cabinet
  • Reduced commissioning times, as the front connector is already wired

FOR S7-1200, 25-MM-S7-1500, ET 200 SP, LOGO

Dapat mentransmisikan 8 sinyal ke supply voltage. Kabel penyambung tersedia dalam range 0.5-2M

KEUNGGULAN

UNIVERSAL CONNECTING CABLE
  • Wire and Ferulles for universal connection to controller inputs and outputs
  • Marking of cable ends to ensure error-free wiring
  • 16-pin IDC plug for 8 digital IO terminal modules
  • Connection to coupling relays for isolating and adjusting potential
  • TOP connect now also available for SIMATIC S7-1500 IO (25MM), ET 200SP, S7-1200, and LOGO, for multiple local users
  • Tested connecting cables for error-free-connection
FOR SIMATIC S7-300 AND ET 200M

Menawarkan 2 kabling sistem untuk efisiensi input dan output modul SIMATIC S7-300 dan ET 200M dengan Full Modular konektivitas membuat konektivitas dengan sensor dan actuator lebih cepat dan lebih jernih.

KEUNGGULAN

FULLY MODULAR CONNECTION
  • Fast and cost efficient wiring
  • Reduction of wiring errors and test times
  • Clear control cabinet wiring
  • Supply voltage with digital and analog signals flexible connectable at the front connector module or at the terminal module
  • Control of 24V loads up to 4 A and up to 500 Hz possible
  • In case of defect, quick and easy replacement of each individual component thanks to modular system design
FLEXIBLE CONNECTION
  • Individual cores can be directly routed to each element in control cabinet
  • Reduction of the wiring work through simple plugging in of the pre-assembled cable into the IO module
  • Higher currents posible through simple plugging in of the pre-assembled cable into the IO module
  • Higher current possible through larger cross-section, lower voltage drop
  • Easy wiring : the number printed on the cores corresponds to the connection point at the front connector
  • Improved clarity of the control cabinet wiring through bundled single cores
  • Front connector available with screw connection as well as scrimp connection
  • Selected screw connection version available with screw connection as well as crimp connection
  • Selected screw connection versions available with UL/CSA-certified single cores

Untuk pertanyaan lebih lanjut silahkan menghubungi kami